UHMW Technical Data / Specifications
This UHMW Technical Data / Specifications Chart is provided as an informative resource for those who are interested in purchasing UHMW PE material.
If you are intersted in purchasing sheets, rods or fabricated parts, Please call or email us via the information provided above.
| UHMW | units | values |
|---|---|---|
mechanical properties |
||
DENSITY |
LBS/ CUBIC FT |
.93 |
TENSILE STRENGTH 2 YIELD |
PSI |
3,050 |
TENSILE MODULUS |
PSI |
120,000 |
ELONGATION @ BREAK |
% |
200 |
FLEXURAL MODULUS |
PSI |
110,000 |
Impact Strength, IZOD (Notched) |
FT-LBS PER INCH OF NOTCH |
NO BREAK |
COMPRESSIVE STRENGTH |
PSI |
2,000 |
WATER ABSORPTION |
OVER 24 HRS / % |
NIL |
Rockwell Hardness |
SHORE D |
68 |
electrical properties |
||
Dielectric Constant |
@ 50 KHZ |
2.3 |
Dielectric Strength |
VOLTS PER MIL |
900 |
Dissipation Factor |
@ 50 KHZ |
0.0002 |
Volume Resistivity |
(ohm-cm) at 50% RH |
>5 x 10 16 |
thermal properties |
||
Max Constant Operating Temperature |
° F |
180 |
Approx. Melting Temperatur |
° F |
280 |
FLAMABILITY |
UL |
94 HB |
Thermal Conductivity |
(BTU-in/ft²-hr-°F) |
2.92 |
Coefficient of LINEAR Thermal Expansion |
x 10-5 in./in./°F |
11 |
SQUARE ENCLOSURES | ROUND ENCLOSURES | RECTANGULAR ENCLOSURES | G10/FR4 | G-7 | G-9 | G-11 | MICARTA® |
PHENOLIC MATERIALS | FISH PAPER | KAPTON® | CNC/MACHINED FOAM | UHMW SHEETS & RODS | MACHINED ALUMINUM
© Copyright 2002 - 2009, JJ Orly, Inc. All Rights Reserved.